Capacitor Contactor

TSM-LC5050 kVAR Capacitor Contactor Thyristor

Name: 50 kVAR Capacitor Contactor Thyristor
Brand: Saba Khazen
SKU: B44066T3850E402

50 kVArThyristor Module TSM-LC-N1

نمای انفجاری

What it is made of

The numbers identify the parts in this drawing. They are not manufacturer part numbers.

فایل سازنده

Catalogue code: TSM-LC50Catalogue reference; the exact stocked part number is not confirmed
Model in the photograph: EPCOS TSM-LC (same photo as product 35)

Film Capacitors – Power Factor Correction / Thyristor Module TSM-LC-N1

Saba Khazen Products CatalogueThyristor modules for dynamic power factor correction
page 23 Read on the site
TSM-LC Thyristor Modules — Installation and MaintenanceTechnical data
page 5 Read on the site
EPCOS Power Quality Solutions — Product ProfileComponent selection table for dynamic PFC
page 98 Read on the site

W 157 × H 200 × D 180 mmapplies to TSM-LC25 / TSM-LC50TSM-LC Thyristor Modules — Installation and Maintenance · page 6From the family document; the photographed unit's exact row is not confirmed.

Review notes

Site datasheet is TSM-LC-N1, while photo is legacy TSM-LC10/LC. Legacy installation manual used for functional construction; exact PCB arrangement unknown.
Both listings use identical TSM-LC photograph; common family illustration reused. Rating-specific internal geometry is unverified.
Website PDF is TSM-LC-N1 B44066T3850E402, while the photograph is legacy TSM-LC. The N1 ordering code is not assigned to the pictured legacy device.
Same TSM-LC front photograph is used by the 25 and 50 kvar listings. Exact rating/order-code suffix is not visible; shared illustration retained.

مشخصات فنی

Thyristor Module TSM-LC-N1 · Film Capacitors – Power Factor Correction · TSM-LC-N1

Technical data and specifications
Net voltage	380 … 440 V
Frequency	50/60 Hz
Max. power	Max. 75 A (up to 50 kvar/400 V) 10 … 24 V DC (approx.. 10 mA) via
Switching-on time	Approx. 5 ms Depending on degree of de-tuning and dimension of discharge
Display	Via 2 LEDs Permanent monitoring of net voltage, real current, temperature and
Monitoring	operation status. Before re-switching after temperature fault, heat sink temperature must be below 50 °C (hysteresis)! Direct connection 4-pole via high current clamps (cable lug 35
Max. RMS-current	100 A; no continuous current –thermal load has to be considered!
Power dissipation	Pv (W) = 2.0 x I (in A); at 400 V/50 kvar typical 150 W
Max. voltage	440 V
Fuses	3 x electronic fuse “superfast” (NH AC 690 V) 50 kvar: 125 A (e.g. SIBA Art.No.: 20 209 20-125) 25 kvar: 63 A (z.B. SIBA Art.Nr.: 20 477 20-63)
Dimensions (in mm)	157 x 200 x 180 (w x h x d)
Weight	4.8 kg
Assembling	Direct mounting on mounting plate
Mounting position	Vertical, minimum 150 mm distance upwards and downwards
Connection diagrams
Pict 1: three phase load (standard)	Pict. 2: two phase load

From the manufacturer's datasheet

نقشه‌ها

Dimensional drawing~~Pict. 3: Dimensions TSM-LC-N1~~Redrawn from the manufacturer's own file, page 6

Connection diagram~~TSM-LC-N1 — Pict 1: three phase load (standard)~~Redrawn from the manufacturer's own file, page 5

هم‌خانواده

Saba Khazen, Your Partner in Industry